5 Tips on How to Protect Coroplast Signs From Damage

5 Tips on How to Protect Coroplast Signs From Damage

Safeguard the longevity and effectiveness of your Coroplast signs, also known as corrugated plastic signs, with valuable tips to prevent damage. Whether you’re utilizing them for advertising, event signage, or other purposes, protecting your signs is crucial. Discover five valuable tips in this article on how to ensure the durability and preservation of your Coroplast signs.

First and foremost, consider the placement of your Coroplast signs. It’s crucial to choose a location that offers protection from harsh weather conditions such as strong winds, heavy rain, or direct sunlight. Additionally, using a UV-resistant coating or laminate can help prevent fading and discoloration caused by prolonged exposure to the sun. Remember that proper handling is also essential in maintaining the quality of your Coroplast signs. By gently placing and removing them when needed, you can avoid bending or breaking them during installation or storage.

Tip #1: Consider the Placement of Your Coroplast Signs

When placing your corrugated plastic signs, particularly for outdoor usage like real estate signs, lawn signs, or event signs, make sure to consider the potential for damage that could occur in high-traffic areas. It is important to choose the best locations for your signs where they will be visible but not at risk of being bumped into or knocked over by passing pedestrians or vehicles. For indoor signs, avoid placing them near doorways, busy walkways, or areas where large crowds gather. Additionally, think about weather exposure when deciding on the placement of your Coroplast signs. Direct sunlight, rain, and strong winds can all cause damage to the signs over time.

One of the best locations for corrugated plastic signs is on fences or walls that are away from foot traffic. This way, they are less likely to get damaged accidentally and can still be easily seen by people passing by. Another good option is using sign holders or stands to elevate your Coroplast signs above ground level. This helps protect them from any accidental contact with feet or vehicles while still ensuring visibility.

To further protect your corrugated plastic signs from damage, consider using a UV-resistant coating or laminate. This will help prevent fading and deterioration caused by prolonged exposure to sunlight. By adding this extra layer of protection, you can extend the lifespan of your signs and keep them looking vibrant and professional for longer periods of time.

When placing your Coroplast signs, it is crucial to consider their potential vulnerability in high-traffic areas and choose the best locations accordingly. Take into account weather exposure as well to avoid unnecessary damage from sun, rain, and wind. Elevating the signage off the ground using sign holders or stands can also provide an added layer of protection against accidental contact. Lastly, applying a UV-resistant coating or laminate will further safeguard your Coroplast signs from fading and deterioration caused by sunlight exposure.

Tip #2: Use a UV-Resistant Coating or Laminate

To ensure your Coroplast signs stay in pristine condition, you’ll want to consider using a high-quality UV-resistant coating or laminate. This protective film acts as a barrier against harmful UV rays from the sun, preventing fading and discoloration of your signs over time. Additionally, it provides an extra layer of weather resistance, protecting your signs from rain, wind, and other elements that could potentially cause damage. By investing in a UV-resistant coating or laminate, you can extend the lifespan of your Coroplast signs and maintain their vibrant appearance for longer.

When choosing a UV-resistant coating or laminate for your Coroplast signs, an ideal choice is a high-quality product that offers a superior level of protection. Look for coatings or laminates specifically designed for outdoor use and made with durable, quality materials. These products should provide excellent UV resistance and weatherproofing properties to keep your signs safe from the elements. Applying the coating or laminate is typically a straightforward process that can be done by following the manufacturer’s instructions.

By using a UV-resistant coating or laminate on your corrugated plastic signs, you are taking an important step towards protecting them from damage caused by exposure to sunlight and harsh weather conditions. However, it’s also crucial to handle these signs with care to further prevent any potential harm.

Tip #3: Handle with Care

Be sure to handle your corrugated plastic signs with care in order to keep them looking their best for as long as possible. One of the key factors in protecting your Coroplast signs is how you handle them during storage and transportation. When storing your signs, it’s important to find suitable storage solutions that will prevent any damage. Keep them in a dry and cool place, away from direct sunlight or extreme temperatures. This will help maintain the integrity of the material and prevent warping or fading.

When it comes to transporting your Coroplast signs, make sure you have proper transportation options in place. If you’re moving them by vehicle, secure them properly so they don’t slide or shift during transit. You can use bungee cords or straps to keep them in place. Additionally, avoid stacking heavy objects on top of the signs as this can cause pressure points and potentially damage the surface.

Handling your Coroplast signs with care is crucial for their longevity. Find appropriate storage solutions that protect them from environmental factors such as sunlight and temperature changes. When transporting the signs, ensure they are secured properly to prevent any shifting or sliding during transit. By taking these precautions, you can keep your Coroplast signs in excellent condition for longer periods of time without compromising their quality.

Now let’s move on to the next section about how to secure the signs properly without causing any damage

Tip #4: Secure the Signs Properly

Make sure you handle your Coroplast signs with care by securely fastening them to prevent any potential harm during transportation or storage. Proper storage is essential to protect your signs from damage. When storing your Coroplast signs, make sure they are stored in a dry and clean area. Moisture can cause the signs to warp or become discolored, so it’s important to keep them in a climate-controlled environment if possible. Additionally, consider using protective covers or bags to further shield the signs from dust and dirt.

Weather protection is another crucial aspect of securing your Coroplast signs properly. If you plan on displaying the signs outdoors, ensure they are securely anchored and protected from harsh weather conditions such as strong winds or heavy rain. This can be achieved by using stakes or weights to hold the signs in place and by adding extra reinforcement around the edges with tape or adhesive strips.

By following these tips on proper storage and weather protection, you can significantly reduce the risk of damage to your Coroplast signs during transportation or while they are being stored. However, it’s also important to regularly inspect and maintain your signs to ensure their longevity and effectiveness. Without regular maintenance, even well-protected Coroplast signs can deteriorate over time due to wear and tear. So, let’s move on to the next section about how you can regularly inspect and maintain your Coroplast signage for optimal performance without compromising its durability.

Tip #5: Regularly Inspect and Maintain

When it comes to regularly inspecting and maintaining your Coroplast signs, there are a few key points to keep in mind. First, you should always be checking for any signs of damage such as cracks, holes, or fading. Secondly, it is important to regularly clean your signs to ensure they are free from dirt, debris, and grime that can affect their visibility. Lastly, if you do notice any damage or wear and tear on your signs, make sure to promptly repair them to prevent further deterioration.

Checking for Damage

Inspect your Coroplast signs regularly to ensure they are free from any damage. By doing so, you can catch any issues early on and take the necessary steps to prevent further damage. Start by examining the edges of the sign for any cracks or breaks. These areas are more susceptible to damage and may require repairing techniques such as applying adhesive or reinforcing with tape. Additionally, check for any bending or warping of the sign, as this can affect its stability and overall appearance. Look for signs of water damage, such as discoloration or peeling of the printed design. If you notice any tears or punctures in the Coroplast material, consider patching them up with a strong and weather-resistant adhesive.

Once you have identified signs of damage on your Coroplast signs, it is important to promptly address them through cleaning and repairing as needed. Use a mild detergent mixed with water to gently clean off any dirt or debris that may have accumulated on the surface of the sign. Avoid using harsh chemicals or abrasive materials that could scratch or damage the printed design. For minor repairs, such as small cracks or tears, you can use clear packing tape to reinforce those areas and prevent further spreading of the damage. However, if there is significant damage that affects the structural integrity of the sign or compromises its visibility, it may be best to replace it entirely. By regularly inspecting your Coroplast signs and taking care of any damages promptly, you can ensure their longevity and effectiveness in conveying your message without interruptions.

Inspecting your Coroplast signs regularly is crucial for identifying signs of damage like cracks, warping, water damage, tears, or punctures early on. Once you spot these issues on your signage material make sure to clean them properly using mild detergent mixed with water while avoiding abrasive materials that could scratch it further. You can also use clear packing tape for minor repairs but remember that severe damages might require complete replacement instead. By taking these preventive measures, you can protect your Coroplast signs from further damage and ensure their durability in conveying your message effectively.

Cleaning and Repairing as Needed

Ensure the longevity and effectiveness of your Coroplast signs by promptly addressing any cleaning or repair needs. Regular cleaning is essential to keep your signs looking vibrant and professional. To clean your Coroplast signs, start by gently wiping off any dirt or debris with a soft cloth or sponge. Avoid using abrasive materials that could scratch or damage the surface of the sign. For tougher stains, you can use a mild soap mixed with water to create a gentle cleaning solution. Apply the solution to the sign using a soft cloth or sponge, and then rinse thoroughly with clean water. It’s important to dry the sign completely before storing or reusing it.

In addition to regular cleaning, taking steps to prevent discoloration can help maintain the appearance of your Coroplast signs over time. One way to prevent discoloration is by avoiding exposure to direct sunlight for extended periods of time. Ultraviolet (UV) rays from the sun can cause fading and yellowing of the sign’s colors. If possible, place your signs in shaded areas or use protective coverings when they are not in use. Another tip is to store your Coroplast signs in a cool, dry place when they are not being used. Excessive heat and moisture can contribute to discoloration and deterioration of the material. By implementing these cleaning techniques and preventing discoloration, you can ensure that your Coroplast signs remain eye-catching and effective for years to come.


In conclusion, protecting your Coroplast signs from damage is essential to ensure their longevity and effectiveness. By carefully considering the placement of your signs, using a UV-resistant coating or laminate, handling them with care, securing them properly, and regularly inspecting and maintaining them, you can greatly increase their lifespan.

Remember to choose strategic locations for your Coroplast signs where they will not be exposed to excessive sunlight or harsh weather conditions. Additionally, applying a UV-resistant coating or laminate will protect the signs from fading and damage caused by prolonged sun exposure. When handling the signs, always be gentle and avoid bending or folding them. It’s also important to secure the signs properly using stakes or other mounting options to prevent them from being blown away by strong winds.

Lastly, make sure to regularly inspect your Coroplast signs for any wear and tear. If you notice any damage or deterioration, take immediate action to repair or replace the signs as needed. By following these tips and taking proactive measures to protect your Coroplast signs, you can maximize their lifespan and maintain their visual appeal for years to come.